Legendary Brands. Serious Performance.
-15%
Fast Delivery
Revo ProPanel Air Filter VW Amarok
RRP. £75.60£64.26SAVE £11.34 (15%)
Revo ProPanel High-Performance Air Filter for VW Amarok
The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.
Benefits
- Designed to increase horsepower and rate of acceleration
- Exceptional filtration
- High airflow with three layers of foam
- Lifetime warranty
- Lasts up to 60,000 miles before cleaning is required depending on driving conditions
- Works with original manufacturers airbox
Design and performance
Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria:
- Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure.
- Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air.
- Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity.
This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.
Three layer foam system
Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter’s surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance.
The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.
1: Stainless steel wire mesh
To avoid erosion, only the highest quality steel is used.
2: Course outer layer:
Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.
3: Medium grade middle layer:
This second filtration layer traps most of the harmful dirt that leads to engine damage.
4: Fine inner layer:
Extracts fine particles while allowing full airflow to the engine for maximum power.
Advantages of a Revo ProPanel filter
- Emissions legal in all 50 US states
- Will not void vehicle warranty
- Lifetime warranty (to the original purchaser with proof of purchase)
Fitment
| Manufacturer | Model | Engine | Year |
|---|---|---|---|
| VW | Amarok | 2.0 TDI | 2010> |
| VW | Amarok | 2.0 TFSI | 2010> |
| VW | Amarok | 3.0 TDI V6 | 2016> |
| Brand |
|---|
RV622M700100 Confirmed Fitment
Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Progressive Parts Ltd are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. More information is available from our Terms & Conditions
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 BiTDI (CDCA) | 163hp
Diesel 1968cc | Pickup | 2010 - 2012
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 BiTDI (CNEA/CSHA) | 180hp
Diesel 1968cc | Pickup | 2011 - 2022
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 BiTDI 4motion (CNEA/CSHA) | 180hp
Diesel 1968cc | Pickup | 2011 - 2022
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 BiTDI 4motion (CDCA) | 163hp
Diesel 1968cc | Pickup | 2010 - 2012
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 TDI (CNFB) | 140hp
Diesel 1968cc | Pickup | 2012 - 2022
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 TDI (CDBA/CNFA) | 122hp
Diesel 1968cc | Pickup | 2010 - 2013
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 TDI 4motion (CNFB) | 140hp
Diesel 1968cc | Pickup | 2012 - 2022
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 TDI 4motion (CDBA/CNFA) | 122hp
Diesel 1968cc | Pickup | 2010 - 2013
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 TSI (CFPA) | 160hp
Petrol 1984cc | Pickup | 2010 - 2016
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 3.0 TDI (DDXA) | 163hp
Diesel 2967cc | Pickup | 2016 - 2019
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 3.0 TDI 4motion (DDXC/DDXD) | 224hp
Diesel 2967cc | Pickup | 2016 - 2022
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 3.0 TDI 4motion (DDXB) | 204hp
Diesel 2967cc | Pickup | 2016 - 2020
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 3.0 TDI 4motion (DDXA) | 163hp
Diesel 2967cc | Pickup | 2016 - 2020
AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 3.0 TDI 4motion (DDXE) | 258hp
Diesel 2967cc | Pickup | 2018 - 2022
AMAROK Platform/Chassis (S1B, S6B, S7B) 2.0 BiTDI 4motion (CNEA/CSHA) | 180hp
Diesel 1968cc | Platform/Chassis | 2011 - 2019
AMAROK Platform/Chassis (S1B, S6B, S7B) 2.0 TDI 4motion (CNFB) | 140hp
Diesel 1968cc | Platform/Chassis | 2011 - 2016
AMAROK Platform/Chassis (S1B, S6B, S7B) 3.0 TDI 4motion (DDXE) | 258hp
Diesel 2967cc | Platform/Chassis | 2018 - 2022
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.