Legendary Brands. Serious Performance.
Revo Ford Fiesta Mk7 ST OEM+ Intake System – RF032M200200
£326.40
Revo Ford Fiesta Mk7 ST OEM+ Intake System – RF032M200200
Increased Power, Torque & Throttle Response
OVERVIEW
The Revo OEM+ Air Intake System for the Ford Fiesta ST is a high performance upgrade that utilises the stock air box, offering gains in both power and torque.
Initial flow testing of the OEM system highlighted the restriction and turbulence caused by the pipe joining the turbo to the airbox. The route varies in diameter and convolutions in the pipe slow airflow to the turbo, choking the engine. The OEM airbox performed far better than expected when used in conjunction with the Revo enhancements.
The Revo system is the only kit currently available that replaces the rear plastic back-pipe with a one-piece 70mm aluminium pipe. Automotive grade silicone couplers connect the system to the stock airbox and a Revo 3 stage foam panel filter replaces the restrictive paper filter. The Revo OEM+ Air Intake system was found to be less restrictive than the stock system during testing and continued to flow air long after the stock system maxes out.
BENEFITS
- OEM+ Look
- Increased Airflow
- +4 WHP & +4 NM Torque
- Improved Throttle Response
KIT INCLUDES
- Revo Hi Flow Panel Filter
- Custom 70mm Mandrel Bent Pipe
- Silcone Hoses
- Fitting Brackets
MORE AIR, LESS RESTRICTION
Flow bench testing saw a significant reduction in restriction over the stock system. The OEM system reached its maximum potential of 300 Cubic Feet per Minute(CFM) with a restriction of 759.3 mmWg, the Revo system was able to flow up to 350 CFM with a mmWg restriction of only 761. At the same 300 CFM point there is a difference of 151 mmWg between the stock and Revo OEM+ intake. This difference allows the engine to still make power at the top of the rev limit when installed with the Revo kit.
| Weight | 6 kg |
|---|---|
| Dimensions | 63 × 58 × 33 cm |
| Brand |
RF032M200200 Confirmed Fitment
Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Progressive Parts Ltd are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. More information is available from our Terms & Conditions
FIESTA VI (CB1, CCN) 1.6 ST (JTJA/JTJB) | 182hp
Petrol 1596cc | Hatchback | 2013 - 2017
FIESTA VI (CB1, CCN) 1.6 ST200 (JTJC) | 200hp
Petrol 1596cc | Hatchback | 2016 - 2017
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.