Legendary Brands. Serious Performance.
Powerflex Black Series Front Arm Rear Bush Anti-Lift & Caster Adjust (2 Required) – PFF16-502GBLK
£186.48
Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability.
All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment.
EARN REWARD POINTS
Purchasing this product will earn you 372 reward points worth £3.72 to redeem on future purchases. You can check your current points here.
- Description
- Additional information
- Vehicle Fitment
- Shipping & Returns
- Warranty
- Question about this product?
Powerflex Black Series Front Arm Rear Bush Anti-Lift & Caster Adjust – PFF16-502GBLK
The Powerflex Black Series Front Arm Rear Bush Anti-Lift & Caster Adjust (PFF16-502GBLK) is engineered for superior performance and precision. Designed around our unique on-car adjustable Nylon/Polyurethane ball-joint combination, this product ensures more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.33 of caster adjustment, with a supplied 27mm spanner to assist in the fine-tuning of your car’s wheel geometry.
This advanced design features a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, maximising performance and articulation while retaining the benefit of on-car adjustability. Each unit comes pre-assembled with the ball and cups encapsulated within a plated metal outer shell, secured by snap-rings.
Please note, this product does not fit arms K04670544AE, K04670545AE, K04877742AD, and K04877743AD as fitted to US models.
Technical
- Diagram fitting position (see product image): 2
- Quantity required: 2
- Included in pack: 2
- Powerflex series: Black
OEM Cross-reference
51857021 / 51857022 / 51857023 / 51857024
50709579 / 50709580 / 51860383 / 51860385 / 50710291
52013961 / 52045068 / 52045069 / 52045072 / 52045075
Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability.
All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment.
POLYURETHANE SPECIALISTS
UK AUTHORISED DEALER
SUSPENSION PERFORMANCE
A wealth of experience derived from years working within race environments.
POLYURETHANE SPECIALISTS
Lightweight and strong, the cornerstone for all materials used in our performance parts.
LIFETIME WARRANTY
On the entire range of Powerflex products, confidence in quality.
Why Polyurethane Bushes?
Suspension bushes are some of the most highly stressed components fitted to a motor car. They undergo enormous strains and in the most arduous of conditions with no maintenance or lubrication.
The material they are manufactured from is a rubber compound containing natural products that deteriorate with age. It becomes softer and more pliable, resisting the forces placed on it less and less. Therefore allowing more and more movement of suspension components and offering less and less control over the suspension geometry.
This in turn causes accelerated tyre wear, braking instability, and poor handling. This is the single biggest reason you can instantly tell the difference driving a three-year-old car compared to a showroom new one. However, even new cars will benefit from POWERFLEX bushes because of the superior design they offer much more effective control of the suspension components to a much greater extent than normal rubber items.
With the technological advances in this material, it has been possible to overcome the common problem associated with harder bushes which is increased noise. By correctly engineering the polyurethane compound, bushes can be made 25-30% stiffer than new rubber items but with exactly the same noise absorbing properties.
POWERFLEX for improved performance. // POWERFLEX for increased safety. // POWERFLEX for prolonged tyre life.
Powerflex Lifetime Warranty
Powerflex is proud to offer a Lifetime Warranty on the entire range of products we manufacture.
We have taken this decision because of the confidence that we have in both our products and also in the way that we have handled any warranty issues in the past.
We have never had a time period based warranty policy because we have always treated issues that customers have had as an opportunity to learn.
Where a problem has occurred due to incorrect fitting, we have always asked ourselves if the reason for the error was due to poor fitting instructions.
When we have had a part failure we have tried to understand if the part was being used outside of its design parameters, perhaps on a race car running slick tyres. In cases like this, should we be offering a specific motorsport compound?
Like all manufacturing, we have had the occasional material quality issue and in these cases, we have always replaced parts without question.
So now we have decided to formalise our open and honest policy and boast about it!
We will replace any Powerflex product that any customer in the world is unhappy with for any reason.
The only conditions that we attach to this Warranty are:
- By purchasing and using Powerflex products, you are agreeing to the terms of our Lifetime Warranty as set out below.
- This Warranty applies to the original purchaser only. Proof of purchase may be required
- That in the event of an issue you contact us directly at [email protected] and give as much information as possible to enable us to help you. This will involve giving us details of the installation and any changes made to the car, photos of failed parts, and the installation.
- Warranty is restricted to the replacement of the supplied goods, but no consequential loss (e.g. carriage charges, garage labour costs, vehicle recovery, car hire, loss of earnings, etc.) from any resulting problems. In the event of failure, we may require the old, failed parts returned to us for inspection after sending replacements.
- Any parts used for track/motorsport/competition purposes or part numbers ending ‘BLK’ are excluded from our Lifetime Warranty.
What we ask in return is that anyone wanting replacement parts contacts us directly and sends us as much information as possible which will help us determine the reason for a problem.
| Weight | 10.44 kg |
|---|---|
| Brand |
PFF16-502GBLK Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.