Legendary Brands. Serious Performance.
-10%
PAGID RST 3 Racing Brake Pad (Shape 2127) S2127T03001
Original price was: £327.31.£294.58Current price is: £294.58.
EARN REWARD POINTS
Purchasing this product will earn you 294 reward points worth £2.94 to redeem on future purchases. You can check your current points here.
- Description
- Additional information
- Vehicle Fitment
- Shipping & Returns
- Warranty
- Question about this product?
PAGID RST 3 Racing Brake Pad (Shape 2127) S2127T03001
Built for hard, short to medium stints where confident stopping matters. PAGID RST 3 gives strong initial bite, steady pedal feel, and repeatable performance lap after lap. Ideal for sprint racing, rally tarmac and gravel, hillclimbs, and aggressive track use.
RST 3 is a medium friction racing compound. It heats up fast, resists fade at high temperatures, and is easy to modulate. Drivers often pair it on the rear axle with a higher-friction front to balance the car under braking.
For track and competition use. Not recommended for everyday road driving.
Why choose RST 3
- Strong bite with stable, medium friction for predictable stops
- Fast warm-up and consistent performance through the heat cycle
- Good modulation for trail-braking and tight control at the limit
- Proven in GT, touring, rally and single-seater applications
Technical specifications
| Compound | PAGID RST 3 |
| Pad shape | 2127 |
| Part number | S2127T03001 |
| EAN | 4056029006789 |
| Average friction | ~0.45 – 0.50 |
| Working temperature | Approx. 100 – 700°C (peaks to ~800°C) |
| Recommended use | Sprint racing, rally (tarmac/gravel), hillclimb, aggressive track |
| Pedal feel | Strong initial bite with smooth, linear control |
Fitment and applications
Pad Shape 2127 fits a range of popular performance calipers and models often used in club motorsport and track builds. It suits many GT, touring and single-seater setups, plus rally cars on tarmac and gravel.
Use our vehicle lookup to confirm fitment, or check the Vehicle Fitment tab for full details.
Good to know
- Race compounds may increase disc/pad wear, noise and dust compared to road pads
- Bed-in properly to achieve full performance and avoid vibration
- Combine with high-quality fluid and discs for best results
Pad Dimensions
PAGID Racing Authorised Distributor
| Weight | 5 kg |
|---|---|
| Dimensions | 17 × 13 × 12 cm |
| Brand | |
| Axle Fitment | |
| R90 Compliant |
S2127T03001 Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.