Legendary Brands. Serious Performance.
-5%
PAGID RST 1 Racing Brake Pad (Shape 8267) S8267T01001
RRP. £401.95£381.85SAVE £20.10 (5%)
- Description
- Additional information
- Vehicle Fitment
- Shipping & Returns
- Warranty
- Question about this product?
PAGID RST 1 Racing Brake Pad (Shape 8267) S8267T01001
Built for sprint racing and aggressive track use, the PAGID RST 1 delivers very high initial bite, strong stopping power and repeatable performance lap after lap. It works best when hot and is ideal for front axle use on powerful track cars and race cars.
What it does
RST 1 gives a firm pedal and rapid response with minimal delay. It resists fade at high temperatures, so braking stays consistent in short to medium stints. Expect faster deceleration and confident modulation when pushing hard.
Best suited to
– Sprint racing, time attack and tarmac rally stages
– Track days for experienced drivers who run proper warm-up laps
– Front axle on GT, touring, club racing and single-seater applications
Not recommended for road use due to noise, dust and required operating temperatures.
Key characteristics
– Very high friction with strong cold bite for a race pad
– Excellent fade resistance and stability at high temperatures
– Linear, confidence-inspiring pedal feel
– Moderate to high disc and pad wear compared to endurance compounds
Fitment guidance
Uses PAGID pad shape 8267. This shape is common in motorsport-grade calipers and performance kits. Fits a range of popular track-focused vehicles and big brake setups. Please use our vehicle lookup to confirm fitment, or check the Vehicle Fitment tab for full details.
Bed-in advice
Follow a proper bedding procedure to seat the pad and create a stable transfer layer on the disc. Build temperature gradually with several medium stops, allow partial cool-down, then make a few firm stops. Avoid coming to a complete halt with hot brakes on new pads.
| Compound | PAGID RST 1 |
| PAGID Part No. | S8267T01001 |
| Pad Shape | 8267 |
| EAN | 4056029047904 |
| Friction Level | Very high, strong initial bite |
| Temperature Range | Approx. 100 – 800°C (optimal in the mid-high range) |
| Use Case | Sprint racing, time attack, tarmac rally, advanced track days |
| Axle Position | Front recommended (rear use case dependent) |
Pad Dimensions
PAGID Racing Authorised Distributor
| Weight | 5 kg |
|---|---|
| Dimensions | 17 × 13 × 12 cm |
| Brand | |
| Axle Fitment | |
| R90 Compliant |
S8267T01001 Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.