Legendary Brands. Serious Performance.
-5%
PAGID RSL 29 Racing Brake Pad (Shape 1539) S1539R29001
Original price was: £503.83.£478.64Current price is: £478.64.
EARN REWARD POINTS
Purchasing this product will earn you 957 reward points worth £9.57 to redeem on future purchases. You can check your current points here.
- Description
- Additional information
- Vehicle Fitment
- Shipping & Returns
- Warranty
- Question about this product?
PAGID RSL 29 Racing Brake Pad (Shape 1539) S1539R29001
Compound overview – RSL 29
Endurance-proven pad with stable, medium-high friction for long runs. Strong initial bite, very good pedal feel, and excellent control when trail braking. Low disc wear for long life. Fade-resistant across a wide temperature range, so performance stays consistent lap after lap.
Performance you can feel
– Confident stopping power from cold to hot track temps
– Smooth, repeatable modulation for precise braking
– Built for long stints with minimal pad and disc wear
– Reliable braking on slicks or performance road tyres
Best suited to
Ideal for endurance racing, track days, GT and touring car applications, and heavy, fast cars that need stable braking over long sessions. Works well front or rear depending on balance. For mainly road use, expect more dust and noise than an OE pad.
Fitment and pad shape
Pad Shape 1539 suits a range of motorsport calipers and performance models. Use our vehicle lookup to confirm your car, or check the Vehicle Fitment tab for full details. If you run big brake kits, verify the caliper and pad shape before ordering.
Technical data
| Compound | PAGID RSL 29 |
| PAGID Part No. | S1539R29001 |
| Pad Shape | 1539 |
| EAN | 4056029008103 |
| Friction level | Approx. 0.42 average |
| Operating temp | Approx. 100 – 700°C |
| Strengths | Long life, low disc wear, excellent modulation |
| Typical use | Endurance racing, track days, GT/touring |
Installation notes
– Bed in carefully to stabilise the compound and mate to the disc surface
– Use high quality brake fluid with a high boiling point
– Match with fresh, quality discs for best results
– Expect some noise and dust in daily driving
Track-only setups may not be road legal in all areas – check local regulations.
Pad Dimensions
PAGID Racing Authorised Distributor
| Weight | 5 kg |
|---|---|
| Dimensions | 17 × 13 × 12 cm |
| Brand | |
| Axle Fitment | |
| R90 Compliant |
S1539R29001 Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.