Legendary Brands. Serious Performance.
-5%
PAGID RSL 29 Racing Brake Pad (Shape 1538) E153829010
Original price was: £503.83.£478.64Current price is: £478.64.
EARN REWARD POINTS
Purchasing this product will earn you 957 reward points worth £9.57 to redeem on future purchases. You can check your current points here.
- Description
- Additional information
- Vehicle Fitment
- Shipping & Returns
- Warranty
- Question about this product?
PAGID RSL 29 Racing Brake Pad (Shape 1538) E153829010
Built for endurance racing. RSL 29 gives stable, predictable braking with very low wear and excellent fade resistance. It delivers strong bite once warm, smooth modulation, and consistent performance over long stints.
Technical overview
| Compound | PAGID RSL 29 |
| Application focus | Endurance racing and track days |
| Friction level | Medium-high, very stable |
| Typical temp window | 100°C – 700°C+ |
| Fade resistance | Excellent at sustained high temps |
| Modulation | Smooth and easy to control |
| Wear | Very low pad wear for long runs |
| Pad shape | 1538 |
| Part number | E153829010 |
| EAN | 4056029017303 |
Why choose RSL 29
– Designed to keep friction consistent as temperatures rise.
– Strong bite when up to temperature, with progressive pedal feel.
– Trusted in GT, endurance and club racing where long pad life matters.
Vehicle suitability
Ideal for track-prepped road cars and race cars that run long sessions, endurance events, and demanding track days. Also suits heavier performance cars that need stable braking at high speed. For road-only use, warm-up time and dust may not suit daily driving.
Use our vehicle lookup to confirm fitment, or check the Vehicle Fitment tab for full details.
Fitment notes
Pad shape 1538. PAGID part number E153829010. Please compare your existing pads or use the sites lookup tool before ordering. Mixing different pad compounds on the same axle is not recommended.
Bedding-in guide
– Make 6-8 gentle stops from 60-20 mph to bring pads and discs up to temperature.
– Follow with 4-6 medium stops from 70-30 mph without coming to a complete halt.
– Allow a short cool-down drive with minimal braking.
– After bedding, avoid sitting on the pedal at a stop while hot.
What to expect
– Strong, consistent braking once warm.
– More dust and potential noise than OE pads.
– Works best with quality performance brake discs in good condition.
Track-focused compound. Not optimised for cold road use.
Pad Dimensions
PAGID Racing Authorised Distributor
| Weight | 5 kg |
|---|---|
| Dimensions | 17 × 13 × 12 cm |
| Brand | |
| Axle Fitment | |
| R90 Compliant |
E153829010 Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.