NGK SILZKFR8E7S Laser Iridium Spark Plug – 90654
This NGK Laser Iridium spark plug provides a strong, consistent spark under daily driving and high-load use. It helps cold starts, smooth idle, and reliable performance in turbo engines. The fine iridium centre electrode needs less voltage to fire, while the platinum-tipped ground electrode improves durability and stability over a long service life. Ideal for standard cars and mild tunes where dependable ignition is key.
- Stable spark for cleaner combustion and smoother throttle response
- Iridium centre and platinum ground for long life and consistent performance
- Resistor design to reduce electrical noise that can affect sensors and the ECU
Broad compatibility
Fits many modern VW, Audi, SEAT and Skoda 1.8 and 2.0 TSI/TFSI EA888 Gen 3 engines. Please use the vehicle lookup to confirm fitment, or check the Vehicle Fitment tab for full details.
| Part number | NGK SILZKFR8E7S |
|---|---|
| NGK stock number | 90654 |
| GTIN | 87295906545 |
| Category | 686 – Spark Plug |
| Type | Laser Iridium (iridium centre, platinum ground) |
| Heat range | 8 (NGK scale) |
| Thread size | M14 x 1.25 |
| Reach (thread length) | 26.5 mm |
| Hex size | 16 mm |
| Seat type | Flat seat with gasket |
| Gap | 0.8 mm (preset) |
| Resistor | Yes |
| Terminal | Solid SAE |
| Recommended tightening | By angle with new gasket: finger tight, then 1/2 – 2/3 turn (or torque to manufacturer spec) |
| Typical torque | 23 – 25 Nm for M14 gasket seat (always follow vehicle spec) |
| Construction | Fine-wire iridium centre electrode, laser-welded; platinum pad ground electrode |
| Service interval | Refer to vehicle schedule; iridium/platinum design supports extended intervals |
Tip: Keep the factory heat range unless your tuner specifies otherwise. Always check and adjust plug gap only if the vehicle or tune requires it.
The price displayed is for a single plug, please add the desired amount to your basket.



