Legendary Brands. Serious Performance.
-43%
NGK AB-6 Spark Plug (2910)
RRP. £11.03£6.26SAVE £4.77 (43%)
NGK AB-6 Spark Plug (Stock No. 2910) – Reliable ignition for classic and industrial engines
The NGK AB-6 is a robust, non-resistor spark plug designed for dependable cold starts and steady combustion. It suits many classic vehicles, stationary engines, and older performance applications that use large 18 mm plugs. It helps improve throttle response and idle stability while resisting fouling during short trips or light-load use.
Use our vehicle lookup to confirm fitment, or check the Vehicle Fitment tab for full details.
- Strong, consistent spark for easier starting and smoother running
- Nickel alloy centre and ground electrodes for long service life
- Copper core for better heat transfer and knock resistance
| Part number | AB-6 |
|---|---|
| NGK stock number | 2910 |
| GTIN | 087295129104 |
| Category | 686 – Spark Plug |
| Thread diameter | 18 mm |
| Thread pitch | 1.5 |
| Reach (thread length) | 12.7 mm (1/2 inch) |
| Hex size | 25.4 mm (1 inch) |
| Seat type | Gasket |
| Heat range | 6 (medium) |
| Resistor | No |
| Electrode material | Nickel with copper core |
| Gap (factory) | 0.6 – 0.7 mm |
| Terminal type | Solid terminal |
| Electrode design | Standard, non-projected |
| Typical applications | Classic cars and bikes, agricultural and industrial engines using 18 mm plugs |
Important: Always set the gap to the engine maker’s spec. Over-tightening can damage the cylinder head tighten to the correct torque.
The price displayed is for a single plug, please add the desired amount to your basket.
Additional Information
| Weight | 0.05 kg |
|---|---|
| Dimensions | 10 × 3 × 3 cm |
| Brand |
NGK-2910 Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.