MST Performance Hyundai Elantra 1.6T (2018+) Air Intake Kit

MST Performance Air Intake Kit – Hyundai Elantra 1.6T (2018+)

If you want more response and a bit more power from your Hyundai Elantra 1.6T, this air intake kit from MST Performance is a straightforward and effective upgrade. It replaces the restrictive factory airbox with a free-flowing intake system, giving the turbocharger a better supply of cooler, denser air – which is exactly what it needs to perform at its best.

MST Performance are a well-regarded name in the performance intake market, and this kit is designed specifically for the 2018 and later Elantra 1.6T. Everything is purpose-built to fit cleanly and work properly, not just a generic solution adapted to fit.

What Does It Actually Do?

The standard airbox fitted from the factory is designed with cost and packaging in mind, not performance. It can restrict airflow, which limits how efficiently the turbocharger can do its job. This MST kit opens that up – air flows more freely into the turbo, improving throttle response (how quickly the car reacts when you press the accelerator) and giving a noticeable improvement in power delivery.

You’ll also notice more induction sound – a pleasing intake noise under acceleration that the factory airbox largely suppresses. It’s not overbearing, but it does make the car feel more alive.

Performance Gains

Dyno testing (rolling road power measurement) has shown gains of up to 12-14bhp with this kit fitted. It’s worth noting that real-world results can vary depending on the condition of your vehicle, whether it has been tuned, and other factors. On a standard car, gains at the lower end of that range are more typical – but even modest improvements in airflow will be felt in everyday driving, particularly in throttle response and mid-range pull. On an already-tuned car, the kit supports and complements existing modifications well.

What’s Included

• Black powder-coated heat shield – helps keep hot engine bay air away from the intake
• Black powder-coated inlet pipe – replaces the factory plastic trunking
• Red pleated dry filter – easy to maintain, clean, and reuse (no oiling required)
• Silicone joiner – connects the components with a secure, airtight seal
• Full fitting hardware and step-by-step instructions

The dry pleated filter is a practical choice for everyday use – it doesn’t require re-oiling like some aftermarket filters, and it’s simple to remove and clean when needed.

Fitment

This kit is designed for the Hyundai Elantra 1.6T (2018 onwards). Please use the vehicle lookup tool on this site or check the Vehicle Fitment tab to confirm compatibility with your specific model and variant before purchasing.