MMR Performance Twin Charge Coolers – BMW M5/M6/S63 F1X/F90 – MMR05-1002
The MMR Performance Charge Coolers for the S63-powered BMW M5 & M6 F1x plus M5 F90 improves power and torque output significantly by substantially reducing charge air temperatures.
Using a large tube and fin stepped core, these coolers provide literally double the cooling area and almost 28% larger per cooler than OE. The factory charge coolers used on the S63 engine have proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air intake temperatures soar. The intercooler core was developed specifically for the high requirements of the F1x & F9x M-cars.
Using a large tube and fin stepped core, our performance charge coolers provides double the cooling area and almost 28% larger per cooler than OE. Our development focused on finding the sweet spot of maximum IAT cooling versus minimum pressure loss allowing increased size without increased lag. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance. The core itself uses internal turbulators to improve its cooling performance and the CFD optimised cast end tanks assist with maintaining the best possible airflow across the core.
Features
- 28% increase in core size per each charge cooler compared to the OEM charge air coolers.
- Delivers substantial temperature drop across the core, with minimal impact on pressure drop
- Anti-corrosive thermal coating
- Easy installation, not cutting or permanent modification to the vehicle required
MMR PART NUMBER: MMR05-1002
CATEGORY: TWIN CHARGE COOLERS I BMW M5 I M6 I S63 F1x I F90