Legendary Brands. Serious Performance.
New
Genuine Spark Plug Connector – VAG MQB 1.8/2.0TSI EA888.3
£23.52
Genuine Spark Plug Connector – VAG MQB 1.8 & 2.0 TSI EA888.3 (06K905199A)
This is a genuine VAG spark plug connector for MQB-platform 1.8 TSI and 2.0 TSI EA888.3 engines. It is a direct replacement for connectors that have cracked, become brittle, or broken during routine maintenance – a common issue on these engines, particularly on higher-mileage cars that have been through many heat cycles.
The spark plug connector is the small but important link between the ignition coil and the spark plug. It carries the high-voltage electrical signal that fires the plug. If this connector is damaged, loose or cracked, the spark can become weak or inconsistent – leading to misfires, rough idling, poor starting, or hesitation under power.
Why connectors fail on these engines
Over time, the heat from the engine causes the plastic connector body to harden and become brittle. When an ignition coil pack is removed – perhaps for a service or to investigate a fault – it is not unusual for the connector to split or snap. Even a small crack is enough to cause problems, as the connection between coil and plug needs to be clean and secure at all times.
Common signs that this connector needs replacing include:
- The connector breaks or splits when a coil pack is removed
- Visible cracks or damage to the plastic body
- Engine misfires, hesitation, or an uneven idle that developed after working on the ignition system
- A coil pack that no longer clips or seats firmly onto the spark plug
Replacing the connector with a genuine part restores a proper, secure fit and brings the ignition system back to factory specification. It is a straightforward fix that is often overlooked when chasing ignition faults.
This connector is also compatible with aftermarket performance ignition coil packs, making it equally useful if you have already upgraded your coils.
Fitment
This connector is suited to a wide range of MQB-platform VAG vehicles fitted with the 1.8 TSI or 2.0 TSI EA888.3 engine, including popular models from VW, Audi, SEAT and Skoda. Please use the vehicle lookup tool on this site, or check the Vehicle Fitment tab, to confirm compatibility with your specific model and engine before ordering.
OEM Part Number: 06K905199A
Additional Information
| Weight | 0.5 kg |
|---|---|
| Brand |
06K905199A Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.