Forge Motorsport KO4 Upgrade Actuator 2.0L for Audi VW SEAT Skoda
£163.04
- Description
- Additional information
- Vehicle Fitment
- Shipping & Returns
- Warranty
- Question about this product?
Forge Motorsport Replacement Turbo Actuator for MK5 Golf with 2.0 FSi Engine
The Forge Motorsport Replacement Turbo Actuator is specifically designed for vehicles based on the MK5 Golf chassis with the 2.0 FSi engine. This billet two-piece replacement aluminium turbo actuator is manufactured from high-quality 6026 grade aluminium, ensuring durability and performance.
With a wide range of actuator replacements available, Forge Motorsport offers a choice of spring pressures to suit your car’s specific needs. The actuator is vehicle and turbo specific, ensuring a perfect fit and optimal performance.
Each actuator is built to order and machined and hand polished in the UK. The Forge Motorsport Replacement Turbo Actuator is available with either a piston or diaphragm operation, depending on your preference and requirements. The diaphragms are reinforced with Nomex for added strength and durability.
For easy installation, the actuator comes with laser-cut stainless steel brackets (where applicable). Forge Motorsport also offers tuning and service kits for this actuator, allowing you to fine-tune and manage your specific boost requirements.
As a UK-made product, the Forge Motorsport Replacement Turbo Actuator comes with a lifetime warranty*, giving you peace of mind and confidence in its quality and performance.
Please note that the pressure figures listed are minimum regulated pressure figures. If you have any questions or need assistance, feel free to contact us at Progressive Parts.
When you choose the Forge Motorsport Replacement Turbo Actuator, you can expect improved response and better control over your boost levels. This actuator is designed to increase the boost output of your turbocharged system, allowing for enhanced performance.
It’s important to note that Forge Motorsport cannot guarantee compatibility with all applications or the ability to increase boost output beyond the parameters set by your vehicle’s engine management system. If you have a tuned vehicle or require a higher boost level, please contact us directly to discuss your specific needs.
The Forge Motorsport Replacement Turbo Actuator is available with either diaphragm sealed internals or piston sealed internals. The piston sealed internals offer equal performance to the diaphragm type and require less maintenance due to their hard-wearing nature.
At Progressive Parts, we offer the Forge Motorsport Replacement Turbo Actuator along with fitting services at our performance workshop. If you have any questions or need further information, please don’t hesitate to contact us.
In The Box:
- 1 x FMACVAG06 Actuator
- 1 x Forge Sticker
*Lifetime warranty terms and conditions apply.
| Weight | 1 kg |
|---|---|
| Brand |
FMACVAG06 Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
UK Shipping
All items marked as available for 'Express Delivery' are dispatched next working day before 3pm.
If you order contains a mixture of 'In Stock', 'Stock Order' or 'Backorder' items, your order may be split to optimise logistics and improve delivery times.
Out of stock items are sourced from our extended inventory and supplier inventory where possible. These may require manufacturing or carry extended lead times which we endeavour to alert you about if the website hasn't already provided an estimated delivery timescale.
DELIVERY INFORMATION
International Shipping
For accurate pricing, please visit the website checkout which will automatically generate a shipping quote to your country.
If your delivery address is outside of the UK, local tax will be removed and you will have to pay import duties and taxes when the shipment reaches your country.
All international shipments may be subject to cross-border inspections by customs authorities while customs policies vary widely from country to country. You must meet any additional charges for customs clearance and we recommend that you contact your local customs office for further information.
DELIVERY INFORMATION
Returns
Progressive Parts operates a 14 day return period from the date of delivery for unused products.
Follow the returns process below for our team to generate you an RMA ID and instruct you to return the goods.
RETURNSWarranty Information
This product is supplied with a manufacturer’s warranty only. No additional warranty is provided by Progressive Parts Ltd. (Our Terms & Conditions)
For details of coverage, terms and conditions, please refer to the manufacturer’s warranty information below or visit their website.
Forge Motorsport's Warranty Policy
Forge Motorsport are one of the largest manufacturers of aftermarket turbo accessories, bringing cutting edge design and the highest quality to our product line, we strive every day to bring excellence to our customers. Sometimes, things can go wrong and we want YOU the customer to know you will be looked after beyond any level of customer service you have ever experienced before. With that in mind, the Forge Motorsport (Limited) Lifetime Warranty covers only products that have been purchased directly from us, or one of our authorised distributors/dealers.
If your Forge product fails or breaks due to a manufacturing issue or defect, we will repair or replace, at no charge to the customer at our discretion. This service will only be carried out IF the Forge product is still in its original unchanged design condition and the item/product has not been modified or changed in anyway. The Forge Motorsport (Limited) Lifetime Warranty will not cover any damage or failure caused by; improper or incorrect installation, normal wear and tear, the normal degradation of material over time, finished colour/aesthetic appearance of the product or if the product has been exposed to the use of any Traffic Film Remover or alternative acidic cleaner (commonly used in hand car washes).
The warranty will also be invalid if the Forge product has not been fitted to correct applications that it was designed for. Any damage to Forge products that occur outside of the warranty can be sent in for evaluation and a quotation to repair or replace said product along with a return shipping fee. The Forge products that are covered by our (Limited) Lifetime Warranty are to the original purchaser or owner of the Forge item for the lifetime of that said product only. The warranty policy is NOT TRANSFEREABLE However given the quality of the product that Forge manufacture we are confident of great longevity of your “Engineered for Performance” Forge part.
The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. For the Hyundai engine cover applications, we would recommend considering this modification solely for show use, as it will discolour from heat due to the location of the turbo charger. All other aspects of your carbon fibre products are covered by our warranty process.
Starting a Claim
Please contact our team directly via email. You will be supplied a warranty form and instructions on how to complete your claim.
Question about this product?
Our team will respond as quickly as possible, please also consider using the chat widget (located bottom right of the webpage).
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.