Forge Motorsport Induction Kit for Suzuki Swift Sport 1.4 Turbo ZC33S (LHD)
Price range: £400.75 through £405.37
- Description
- Additional information
- Vehicle Fitment
- Shipping & Returns
- Warranty
- Question about this product?
Forge Motorsport LHD Induction Kit for Suzuki Swift Sport 1.4 Turbo ZC33S
The Forge Motorsport LHD Induction Kit is specifically designed for Suzuki Swift Sport 1.4 Turbo ZC33S vehicles with left-hand drive. Please note that this intake will not fit the right-hand drive version of the vehicle.
After the success of Forge Motorsport’s Induction Kit for the RHD Suzuki Swift Sport (ZC33S), they have developed an equivalent aftermarket intake filtration system for LHD swift owners. This kit has been extensively tested and offers the same qualities as the FMINDK29 kit, including increased power and torque output, improved engine sound characteristics, and enhanced visual impact in the engine bay.
During testing, Forge Motorsport found that the original air box location was prone to heat soak. To combat this, they relocated the air filter/airbox in the engine bay and used carbon fibre canister filters for optimal performance. The kit’s pipe work runs around the cold side of the engine to keep intake temperatures as low as possible. With this kit, intake temperatures were observed to decrease from 32°C to 26°C. Further temperature reductions can be achieved with the addition of Forge Motorsport’s intercooler upgrade.
The Forge Motorsport LHD Induction Kit features a 100% carbon fibre cannister and a Forge High Flow filter, resulting in a notable 6bhp increase according to independent dyno testing. The kit also adds excitement to the driving experience with a subtle yet characterful induction roar during harder acceleration.
Visually, the kit is impressive with its high-quality components, including a handmade aluminium hard pipe, bespoke silicon hose, and carbon fibre filter. The installation process is straightforward and can be completed in approximately 40 minutes with the provided full-color instructions.
When fitting the filter, it is important not to over tighten the hose clamp connecting the filter to its counterpart. Over tightening can lead to crushing and potential fitment or performance issues. The recommended torque setting for the hose clamp is 2-2.4Nm.
At Progressive Parts, we offer fitting services for the Forge Motorsport LHD Induction Kit at our performance workshop. Experience the benefits of this high-quality intake system for your Suzuki Swift Sport 1.4 Turbo ZC33S.
| Weight | 14 kg |
|---|---|
| Brand |
FMINDK32 Confirmed Fitment
Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Progressive Parts Ltd are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. More information is available from our Terms & Conditions
UK Shipping
All items marked as available for 'Express Delivery' are dispatched next working day before 3pm.
If you order contains a mixture of 'In Stock', 'Stock Order' or 'Backorder' items, your order may be split to optimise logistics and improve delivery times.
Out of stock items are sourced from our extended inventory and supplier inventory where possible. These may require manufacturing or carry extended lead times which we endeavour to alert you about if the website hasn't already provided an estimated delivery timescale.
DELIVERY INFORMATION
International Shipping
For accurate pricing, please visit the website checkout which will automatically generate a shipping quote to your country.
If your delivery address is outside of the UK, local tax will be removed and you will have to pay import duties and taxes when the shipment reaches your country.
All international shipments may be subject to cross-border inspections by customs authorities while customs policies vary widely from country to country. You must meet any additional charges for customs clearance and we recommend that you contact your local customs office for further information.
DELIVERY INFORMATION
Returns
Progressive Parts operates a 14 day return period from the date of delivery for unused products.
Follow the returns process below for our team to generate you an RMA ID and instruct you to return the goods.
RETURNSWarranty Information
This product is supplied with a manufacturer’s warranty only. No additional warranty is provided by Progressive Parts Ltd. (Our Terms & Conditions)
For details of coverage, terms and conditions, please refer to the manufacturer’s warranty information below or visit their website.
Forge Motorsport's Warranty Policy
Forge Motorsport are one of the largest manufacturers of aftermarket turbo accessories, bringing cutting edge design and the highest quality to our product line, we strive every day to bring excellence to our customers. Sometimes, things can go wrong and we want YOU the customer to know you will be looked after beyond any level of customer service you have ever experienced before. With that in mind, the Forge Motorsport (Limited) Lifetime Warranty covers only products that have been purchased directly from us, or one of our authorised distributors/dealers.
If your Forge product fails or breaks due to a manufacturing issue or defect, we will repair or replace, at no charge to the customer at our discretion. This service will only be carried out IF the Forge product is still in its original unchanged design condition and the item/product has not been modified or changed in anyway. The Forge Motorsport (Limited) Lifetime Warranty will not cover any damage or failure caused by; improper or incorrect installation, normal wear and tear, the normal degradation of material over time, finished colour/aesthetic appearance of the product or if the product has been exposed to the use of any Traffic Film Remover or alternative acidic cleaner (commonly used in hand car washes).
The warranty will also be invalid if the Forge product has not been fitted to correct applications that it was designed for. Any damage to Forge products that occur outside of the warranty can be sent in for evaluation and a quotation to repair or replace said product along with a return shipping fee. The Forge products that are covered by our (Limited) Lifetime Warranty are to the original purchaser or owner of the Forge item for the lifetime of that said product only. The warranty policy is NOT TRANSFEREABLE However given the quality of the product that Forge manufacture we are confident of great longevity of your “Engineered for Performance” Forge part.
The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. For the Hyundai engine cover applications, we would recommend considering this modification solely for show use, as it will discolour from heat due to the location of the turbo charger. All other aspects of your carbon fibre products are covered by our warranty process.
Starting a Claim
Please contact our team directly via email. You will be supplied a warranty form and instructions on how to complete your claim.
Question about this product?
Our team will respond as quickly as possible, please also consider using the chat widget (located bottom right of the webpage).
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.