UK
Or Manually Lookup

Manually Select

1
2
3
4
-15%
Eibach sportline lowering springs

Eibach Sportline Lowering Springs SEAT Leon Mk4 KL1/KU1 2.0 TFSI

RRP. £351.32£298.62SAVE £52.70 (15%)

Checking current stock levels...

Klarna
3 payments of £99.54/mo example 0% APR
Clearpay
4 payments of £74.66/mo example 0% APR
Dopple
Compare 6, 12 and 24 month payment options from 16.9% APR
18+, T&C apply, Credit subject to status. Advanced calculator available at checkout.
SKU: E20-81-018-02-22 Categories: , , , , PP-PC-10

Eibach Sportline Lowering Springs SEAT Leon Mk4 2.0 TFSI

Give your SEAT Leon Mk4 2.0 TFSI a lower, more aggressive stance with Eibach Sportline lowering springs. Designed for fast road use, this kit drops the centre of gravity to improve grip and steering response, while still keeping the car usable every day.

Sportline springs are stiffer than standard, reducing body roll and nose dive under braking, so the car feels more controlled and stable in quick direction changes. Ride quality is firmer than OEM, but remains comfortable when paired with good condition dampers.

Key benefits

  • Lower, sportier look without going to full coilovers
  • Sharper turn-in and more confidence in corners
  • Reduced body roll and squat under acceleration
  • Stable, predictable handling for fast road driving
  • Works with factory dampers or matched performance shocks

Important: This kit is for two-wheel drive cars without self-levelling suspension and with independent rear suspension. Heavily equipped cars (such as those with a tow bar or glass roof) may require different OEM rear rubber spring pads – check the parts certificate or your dealer for guidance.

Technical Information

Make Model Variant Model Years Axle Load Front (Max kg) Axle Load Rear (Max kg) Lowering Front (mm) Lowering Rear (mm)
SEAT LEON (KL1, KU1) 2.0 TFSI 11.19 – 1110 965 30-35 mm 30-35 mm

Manufacturer Notes

  • For vehicles without levelling control.
  • Except vehicles with 4WD.
  • For vehicles with rear independant suspension.
  • The original Volkswagen rubber plate 5Q0 512 149 G (9mm) or 8J0 512 149 (13 mm) can be used optionally for vehicles with heavy equipment variants (e.g. rear wheel, trailer coupling, glas roof, etc.) – detailed information can be found in the parts certificate. This is an optinally exchange for the standard VW rubber plate 5Q0 512 149 F (6mm). Only available from Volkswagen dealers or original parts dealers.

Additional Information

Weight 10 kg
Dimensions 65 × 39 × 18 cm
Brand

E20-81-018-02-22 Confirmed Fitment

Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Progressive Parts Ltd are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. More information is available from our Terms & Conditions

SEAT (1 Model)
LEON (KL1, KLG) 2.0 TFSI (CZPB/DNNA) | 190hp
Petrol 1984cc | Hatchback | 2021 - 2026

Stock at Progressive Parts

Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.

What do our stock statuses mean?

1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).

LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.

0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.

MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.

0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.

OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.

We're tuners too!

Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!

In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.

Thank you, Team PP

In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".

For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.

Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.

Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.