Eibach Pro-Street-S Coilover Kit for VW Golf Mk2/Mk3/Cabrio & Jetta/Vento
The Eibach Pro-Street-S Coilover Kit gives your VW a lower, more controlled stance with everyday usability. It replaces the standard suspension with height adjustable coilovers, so you can fine tune how low the car sits while improving handling and steering feel.
On the front axle the ride height is adjusted on the threaded strut body. The rear uses a separate height adjustable unit, allowing you to set the car level and balanced. The result is a more precise, stable feel in corners with a controlled, confident ride on normal roads.
Key benefits
- Adjustable ride height for a cleaner stance and practical ground clearance
- Improved cornering grip and stability
- More direct steering response and reduced body roll
- Tuned for sporty road use without giving up comfort
Note: Some cars may need wheel spacers for clearance and/or additional original parts for correct installation. Always check the technical documents and component list before fitting.
Technical Information
| Make | Model | Variant | Model Years | Axle Load Front (Max kg) | Axle Load Rear (Max kg) | Lowering Front (mm) | Lowering Rear (mm) |
|---|---|---|---|---|---|---|---|
| VW | GOLF II (19E, 1G1) | 1.0, 1.3, 1.3 KAT, 1.6, 1.6 D, 1.6 TD, 1.8, 1.8 GTI, 1.8 GTI 16V, 1.8 GTI G60, 1.8 GTI KAT, 1.8 i KAT | 08.83 – 12.92 | 840 | 740 | 30-65 mm | 30-65 mm |
| VW | GOLF III (1H1) | 1.4, 1.6, 1.8, 1.9 D, 1.9 SDI, 1.9 TD,GTD, 1.9 TDI, 2.0, 2.0 GL, 2.0 GTI 16V, 2.8 VR6 | 08.91 – 07.98 | 890 | 880 | 45-80 mm | 45-80 mm |
| VW | GOLF III CABRIOLET / CONVERTIBLE (1E7) | 1.6, 1.8, 1.9 TDI, 2.0 | 07.93 – 05.98 | 890 | 880 | 45-80 mm | 45-80 mm |
| VW | GOLF IV CABRIOLET / CONVERTIBLE (1E7) | 1.6, 1.8, 2.0, 1.9 TDI | 06.98 – 06.02 | 890 | 880 | 45-80 mm | 45-80 mm |
| VW | JETTA II (19E, 1G2) | 1.3, 1.6, 1.8, 1.6 D, 1.6 TD | 01.84 – 12.92 | 840 | 740 | 30-65 mm | 30-65 mm |
| VW | VENTO (1H2) | 1.4, 1.6, 1.8, 2.0, 2.0 GL, 2.8 VR6, 1.9 SDI, 1.9 D, 1.9 TD, 1.9 TDI | 11.91 – 09.98 | 890 | 880 | 45-80 mm | 45-80 mm |
Manufacturer Notes
- Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
- In order to ensure sufficient clearance it may be necessary to use wheel spacers if the car is equipped with original wheel sizes.
- In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
- If replacement required: You will find the components in the Components Certificate at the point “Amendment of the vehicle documents”. The Components Certificate can be downloaded on: www.eibach.com – click on British flag – Online Catalog / Product & Components Certificate Search (RED BUTTON)

