Eibach Pro-Street-S Coilover Kit Audi Q2/SQ2, Skoda Superb III & VW Passat
The Eibach Pro-Street-S Coilover Kit is designed to give your Audi Q2/SQ2, Skoda Superb III or VW Passat a more controlled, confident feel on the road. It replaces your standard suspension with height-adjustable coilovers, so you can fine-tune how low the car sits and how it responds in corners.
The front uses a threaded strut, allowing you to adjust ride height by turning the body of the damper. At the rear, a separate height-adjustable unit sets the car where you want it. The result is a tighter, more precise drive with reduced body roll and improved stability, while still being suitable for everyday use when set up sensibly.
Key benefits
- Height-adjustable stance for a balanced, sportier look
- Sharper handling and better cornering confidence
- Reduced body roll for a more stable, planted feel
- Customisable setup to suit daily driving or spirited use
- Engineered by Eibach for consistent quality and performance
Important: This kit is only for cars with a 55 mm front damper and without levelling control. Once fitted, factory electronic damper control will be disabled and may need coding out or a compatible cancellation kit to avoid warning lights.
Technical Information
| Make | Model | Variant | Model Years | Axle Load Front (Max kg) | Axle Load Rear (Max kg) | Lowering Front (mm) | Lowering Rear (mm) |
|---|---|---|---|---|---|---|---|
| AUDI | Q2 (GAB) | 2.0 TSI quattro, 2.0 TDI quattro, 35 TDI quattro, 40 TFSI quattro | 06.16 – | 1200 | 1250 | 45-70 mm | 55-80 mm |
| AUDI | Q2 (GAB) | SQ2 | 08.18 – | 1200 | 1250 | 20-45 mm | 25-50 mm |
| SKODA | SUPERB III (3V3) | 1.4 TSI, 1.8 TSI, 2.0 TSI, 1.6 TDI, 2.0 TDI | 03.15 – | 1200 kg | 1250 kg | 30-55 mm | 30-55 mm |
| VW | PASSAT (3G2, CB2) | 1.4 TSI, 1.8 TSI, 2.0 TSI, 1.6 TDI, 2.0 TDI | 11.14 – | 1200 kg | 1250 kg | 30-55 mm | 30-55 mm |
Manufacturer Notes
- For vehicles without levelling control.
- Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
- Only for vehicles with front damper diameter of 55 mm
- In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
- Once the suspension kit is installed the electronic damper control will not be available anymore. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
- If replacement required: You will find the components in the Components Certificate at the point “Amendment of the vehicle documents”. The Components Certificate can be downloaded on: www.eibach.com – click on British flag – Online Catalog / Product & Components Certificate Search (RED BUTTON)
- For vehicles with rear independant suspension.

