Eibach Pro-Street-S Coilover Kit Audi A4 B9 / A5 F5
This Eibach Pro-Street-S coilover kit is a fully height-adjustable suspension upgrade for the Audi A4 B9 and A5 F5. It replaces the factory suspension with threaded front struts and adjustable rear units, so you can fine-tune your ride height for a sportier look and more precise handling.
The kit is built to give a more controlled, planted feel on the road. Body roll is reduced, grip is easier to use with confidence, and the car feels more stable in fast corners and during quick direction changes, while still remaining usable day to day.
Important: Not suitable for cars with 4WD or factory levelling control. If your car has electronic damper control, it will be deactivated when this kit is installed and may trigger a dashboard warning unless the system is reprogrammed or a suitable cancellation module is fitted.
- Height-adjustable coilovers for a tailored stance and handling balance
- Improves cornering stability and reduces body roll
- Gives a more direct, confidence-inspiring steering feel
- Designed for everyday road use with a sportier ride
- Ideal base for a fast-road or lightly tuned street build
Technical Information
| Make | Model | Variant | Model Years | Axle Load Front (Max kg) | Axle Load Rear (Max kg) | Lowering Front (mm) | Lowering Rear (mm) |
|---|---|---|---|---|---|---|---|
| AUDI | A4 (8W2, B9) | 1.4 TFSI, 2.0 TFSI, 2.0 TFSI Mild Hybrid, 2.0 TDI, 3.0 TDI, 35 TFSI Mild Hybrid, 40 TFSI Mild Hybrid, 45 TFSI Mild Hybrid, 30 TDI, 35 TDI, 40 TDI, 40 TDI Mild Hybrid | 05.15 – | 1135 | 1090 | 40-65 mm | 40-65 mm |
| AUDI | A5 (F53, F5P) | 1.4 TFSI, 2.0 TFSI, 2.0 TFSI Mild Hybrid, 2.0 TDI, 3.0 TDI, 35 TFSI Mild Hybrid, 40 TFSI, 40 TFSI Mild Hybrid, 45 TFSI Mild Hybrid, 30 TDI Mild Hybrid, 35 TDI, 35 TDI Mild Hybrid, 40 TDI, 40 TD Mild Hybrid | 06.16 – | 1135 | 1090 | 35-60 mm | 35-60 mm |
Manufacturer Notes
- For vehicles without levelling control.
- Except vehicles with 4WD.
- Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
- In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
- Once the suspension kit is installed the electronic damper control will not be available anymore. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
- If replacement required: You will find the components in the Components Certificate at the point “Amendment of the vehicle documents”. The Components Certificate can be downloaded on: www.eibach.com – click on British flag – Online Catalog / Product & Components Certificate Search (RED BUTTON)
- Housing diameter in the clamping area: 53 mm

