Eibach Pro-Street-S Coilover Kit Audi A3/TT, SEAT Leon & VW Golf/New Beetle
The Eibach Pro-Street-S coilover kit gives your car a lower, more controlled ride with the flexibility to fine tune height front and rear. It replaces the standard suspension with matched springs and dampers, helping the car feel tighter, more stable and more confident in fast road driving.
The front ride height is adjusted via the threaded coilover strut, while the rear uses a separate height adjustable unit. This lets you set the stance you want and dial in a balance between comfort and firmness to suit daily use or weekend blasts.
Key benefits
- Sharper handling and improved cornering confidence
- Reduced body roll and a more planted feel on the road
- Adjustable ride height front and rear for a custom stance
- Sporty feel without sacrificing everyday usability
Important: Designed for 2WD cars without factory self-levelling suspension. Wheel spacers and some original fittings may be needed on certain vehicles – check the technical documents or speak to Progressive Parts before purchase.
Technical Information
| Make | Model | Variant | Model Years | Axle Load Front (Max kg) | Axle Load Rear (Max kg) | Lowering Front (mm) | Lowering Rear (mm) |
|---|---|---|---|---|---|---|---|
| AUDI | A3 (8L1) | 1.6, 1.8, 1.8 T, 1.9 TDI | 09.96 – 05.03 | 1030 | 1025 | 30-70 mm | 30-70 mm |
| AUDI | TT (8N3) | 1.8 T | 10.98 – 06.06 | 1030 | 1025 | 20-45 mm | 20-45 mm |
| AUDI | TT ROADSTER (8N9) | 1.8 T | 10.99 – 06.06 | 1030 | 1025 | 20-45 mm | 20-45 mm |
| SEAT | LEON (1M1) | 1.4 16V, 1.6, 1.6 16V, 1.8 20V, 1.8 20V T, 1.8 T Cupra R,1.9 SDI, 1.9 TDI | 11.99 – 06.06 | 1030 | 1025 | 35-65 mm | 35-65 mm |
| VW | GOLF IV (1J1) | 1.4 16V, 1.6, 1.6 16V, 1.6 FSI, 1.8, 1.8 T, 1.8 T GTI, 1.9 SDI, 1.9 TD, 1.9 TDI, 2.0, 2.3 V5 | 08.97 – 06.05 | 1030 | 1025 | 35-65 mm | 35-65 mm |
| VW | NEW BEETLE (9C, 1C1) | 1.4, 1.6, 1.8 T, 2.0, 1.9 TDI, 2.3 V5 | 01.98 – 09.10 | 1030 | 1025 | 35-65 mm | 35-65 mm |
Manufacturer Notes
- For vehicles without levelling control.
- Except vehicles with 4WD.
- Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
- In order to ensure sufficient clearance it may be necessary to use wheel spacers if the car is equipped with original wheel sizes.
- In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
- If replacement required: You will find the components in the Components Certificate at the point “Amendment of the vehicle documents”. The Components Certificate can be downloaded on: www.eibach.com – click on British flag – Online Catalog / Product & Components Certificate Search (RED BUTTON)

