Legendary Brands. Serious Performance.
Dinan Brembo Front Brake Set for BMW 1-Series (E82) 2008-2013 – Red Calipers, Slotted
£6,037.00
EARN REWARD POINTS
Purchasing this product will earn you 12074 reward points worth £120.74 to redeem on future purchases. You can check your current points here.
Installation Instructions
An installation guide is available for this product, download here.
Dinan by Brembo Front Brake Set – 2008-2013 BMW 1-Series (E82)
Upgrade your BMW 1-Series (E82) with the Dinan by Brembo Front Brake Set, designed for models from 2008 to 2013. This high-performance brake kit features red calipers and slotted rotors, offering superior stopping power for the discerning driving enthusiast.
Key Features
- Red calipers for a striking, competitive look
- Slotted rotors for enhanced braking performance
- Custom brake pads compatible with BMW brake wear sensors
- Optimised for balanced proportioning and excellent pedal feel
- Reduced noise levels compared to typical big brake kits
Performance and Compatibility
The Dinan/Brembo brake system has been rigorously tested on both street and track to ensure optimal performance. It is designed to avoid common issues found in other big brake kits, such as unbalanced braking and poor pedal response.
Wheel and Tyre Considerations
- May require aftermarket wheels for adequate brake clearance
- Recommended to use Dinan’s lightweight performance wheels for best fit
- Ensure wheels provide necessary clearance for Brembo “Gran Turismo” brakes
Important Note
Please verify vehicle emissions compliance with local regulations in your country or territory.
Enhance your BMW’s braking capabilities with the Dinan by Brembo Front Brake Set, ensuring safety and performance on every drive.
Installation Notes
Before any brake purchase please consult our Brembo Brake Caliper fitment guide & installation instructions to ensure proper fitment on your vehicle. Failure to do so may result in brakes that do not conform to the fitment of your specific wheels.
Dinans Lower Control Arm Monoball Kit is highly recommended when installing the brake conversion in order to reduce brake shimmy.
| Weight | 90 kg |
|---|---|
| Dimensions | 33 × 17 × 11 cm |
| Brand |
D290-0811-R Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.