AIRTEC Motorsport Stage 2 Intercooler Kit for Ford Focus RS
The Stage 2 Intercooler is designed for 350bhp+ and is a must-have for any modified RS looking to reach its full potential. Available in Motorsport Silver or Pro-Series Black, this intercooler kit offers the ultimate sleeper look.
Registered Design Right number: 6023252
AIRTEC part no: ATINTFO11
Why do I need a front mount intercooler kit? The original charge cooler kit works fine on standard cars, but on modified cars with increased boost, the water temperatures in the charge cooler can’t cope and start to climb to dangerous levels. This can cause your ACT’s (Air charge temperature) to rise to over 55+ degrees, leading to power loss and possible engine damage. By fitting a front mount intercooler, these ACT’s are kept well below the safe 50 degree mark, allowing your engine to produce more power safely.
This kit can be easily installed at home without any cutting, grinding, or welding. It includes:
- AIRTEC 100m core Focus RS intercooler
- Alloy boost pipes
- Silicon hoses
- Full stainless steel jubilee clips for silicon hoses
- Alloy Battery relocation tray with battery clamps
- Step by step fitting Instructions
- No other parts needed – we provide every bolt and nut you will require
Please note that this kit has been designed to use K&N Gen2 or similar air filters as the original air box cannot be used.
Test results taken @ torque of the devil on 31/01/09:
Before Intercooler was fitted: 262bhp & 306 lbs/ft
After Intercooler was fitted: 292.7 bhp & 345 lbs/ft torque @ 21psi peak boost
ACT drops (Air charge temperature):
Inlet temp (going into intercooler from turbo): 158 degrees
Outlet temp (coming out of intercooler going to inlet manifold): 25 degrees
That’s a 133 degree drop in ACT, simply amazing.
Please remember that our car has a standard Turbo and manifold, and this kit will work even better on cars with aftermarket manifolds and turbos.
Note: All intercooler kits will come with the dump valve take off. This can easily be blanked if not required.
Registered Design Right number: 6023252
AIRTEC part number: ATINTFO11






