Eibach Pro-Street-S Coilover Kit
The Eibach Pro-Street-S Coilover Kit is designed to give your car a lower, sportier stance with precise, confidence-inspiring handling. It replaces your standard suspension with height-adjustable coilovers so you can fine-tune how your car sits and feels on the road.
The front uses a threaded strut for easy height adjustment, while the rear uses a separate height-adjustable unit. This setup improves body control in corners, reduces roll, and helps the tyres stay in better contact with the road, all while remaining usable for daily driving when set up sensibly.
Key benefits
- More controlled, predictable handling in fast road driving
- Adjustable ride height for a clean, purposeful look
- Improved stability and grip through corners
- Tighter, more responsive feel compared to stock suspension
Important: This kit is for cars with a 55 mm front damper size and independent rear suspension. Once fitted, the factory electronic damper control is disabled, and a warning may need to be cleared or managed with suitable coding or modules.
Technical Information
| Make | Model | Variant | Model Years | Axle Load Front (Max kg) | Axle Load Rear (Max kg) | Lowering Front (mm) | Lowering Rear (mm) |
|---|---|---|---|---|---|---|---|
| AUDI | A3 CABRIOLET / CONVERTIBLE (8V7, 8VE) | 1.8 TFSI quattro, 2.0 TFSI quattro, 2.0 TDI quattro, 40 TFSI quattro | 03.14 – | 1140 kg | 1120 | 30-60 mm | 30-55 mm |
| AUDI | A3 CABRIOLET / CONVERTIBLE (8V7, 8VE) | S3 quattro | 03.14 – | 1140 kg | 1120 | 10-35 mm | 0-25 mm |
| SEAT | LEON ST (5F8) | 2.0 Cupra 4Drive | 11.16 – | 1140 kg | 1120 | 5-35 mm | 5-30 mm |
| SEAT | LEON ST Kasten/Kombi (5F8) | 2.0 Cupra 4Drive | 11.16 – | 1140 kg | 1120 | 5-35 mm | 5-30 mm |
| SKODA | OCTAVIA III (5E3, NL3, NR3) | 1.8 TSI 4×4, 2.0 TSI 4×4, 1.6 TDI 4×4, 2.0 TDI 4×4 | 09.14 – 10.20 | 1140 kg | 1120 | 20-50 mm | 25-50 mm |
| SKODA | OCTAVIA III (5E3, NL3, NR3) | 2.0 TDI RS 4×4 | 09.14 – 10.20 | 1140 kg | 1120 | 0-30 mm | 0-25 mm |
| SKODA | OCTAVIA III COMBI / STATION WAGON (5E5) | 1.8 TSI 4×4, 2.0 TFSI 4×4, 1.6 TDI 4×4, 2.0 TDI 4×4 | 09.14 – 10.20 | 1140 kg | 1120 | 20-50 mm | 25-50 mm |
| SKODA | OCTAVIA III COMBI / STATION WAGON (5E5) | 2.0 TDI RS 4×4 | 09.14 – 10.20 | 1140 kg | 1120 | 0-30 mm | 0-25 mm |
| VW | GOLF VII VARIANT (BA5, BV5) | 2.0 R 4motion | 03.15 – | 1140 kg | 1120 | 10-40 mm | 10-35 mm |
Manufacturer Notes
- For vehicles without levelling control.
- Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
- Only for vehicles with front damper diameter of 55 mm
- In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
- Once the suspension kit is installed the electronic damper control will not be available anymore. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
- If replacement required: You will find the components in the Components Certificate at the point “Amendment of the vehicle documents”. The Components Certificate can be downloaded on: www.eibach.com – click on British flag – Online Catalog / Product & Components Certificate Search (RED BUTTON)
- For vehicles with rear independant suspension.

