Eibach Pro-Street-S Coilover Kit Skoda Superb III & VW Passat B8
The Eibach Pro-Street-S Coilover Kit gives your Skoda Superb III or VW Passat B8 a lower, more controlled ride with height adjustment at both front and rear. It replaces the standard suspension with high quality dampers and springs designed to improve grip and confidence without ruining everyday comfort.
Ride height is adjusted by a threaded front strut and a height adjustable rear unit, so you can fine-tune the stance and balance of the car. Body roll is reduced, steering feels more direct, and the car stays more stable at speed and through quick direction changes.
- Adjustable ride height for a cleaner stance and improved balance
- More stable cornering with reduced body roll
- Sharper steering feel and better feedback
- Comfortable enough for daily driving when set up sensibly
Important: This kit is for cars with 55 mm front strut diameter and independent rear suspension. Factory electronic damper control is deactivated when fitted and may trigger a warning light, which can be coded out or managed with a suitable cancellation module.
Technical Information
| Make | Model | Variant | Model Years | Axle Load Front (Max kg) | Axle Load Rear (Max kg) | Lowering Front (mm) | Lowering Rear (mm) |
|---|---|---|---|---|---|---|---|
| SKODA | SUPERB III (3V3) | 1.4 TSI 4×4, 2.0 TSI 4×4, 2.0 TDI 4×4 | 03.15 – | 1200 kg | 1250 kg | 35-60 mm | 35-60 mm |
| SKODA | SUPERB III KOMBI / ESTATE (3V5) | 1.4 TSI, 1.5 TSI, 1.8 TSI, 2.0 TSI, 1.6 TDI, 2.0 TDI | 03.15 – | 1200 kg | 1250 kg | 35-60 mm | 35-60 mm |
| VW | PASSAT (3G2, CB2) | 1.4 TSI 4motion, 2.0 TSI 4Motion, 2.0 TDI 4motion | 11.14 – | 1200 kg | 1250 kg | 35-60 mm | 35-60 mm |
| VW | PASSAT VARIANT (3G5, CB5) | 1.4 TSI, 1.8 TSI, 2.0 TSI, 1.6 TDI, 2.0 TDI | 11.14 – | 1200 kg | 1250 kg | 35-60 mm | 35-60 mm |
Manufacturer Notes
- For vehicles without levelling control.
- Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
- Only for vehicles with front damper diameter of 55 mm
- In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
- Once the suspension kit is installed the electronic damper control will not be available anymore. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
- If replacement required: You will find the components in the Components Certificate at the point “Amendment of the vehicle documents”. The Components Certificate can be downloaded on: www.eibach.com – click on British flag – Online Catalog / Product & Components Certificate Search (RED BUTTON)
- For vehicles with rear independant suspension.

