Eibach Pro-Street-S Coilover Kit Audi A3 8V
The Eibach Pro-Street-S Coilover Kit is designed to give your Audi A3 8V sharper handling and a cleaner, sportier stance without ruining everyday comfort. It replaces the standard suspension with height adjustable coilovers, so you can fine-tune how low the car sits while keeping the ride controlled and usable on normal roads.
The front uses threaded struts and the rear uses an adjustable height unit, allowing you to set the car up for daily driving, fast road use, or a balanced mix of both. Body roll is reduced, grip is improved, and the car feels more stable and predictable in corners.
Key benefits
- More precise, confident handling compared with stock suspension
- Adjustable ride height for a neater stance and better balance
- Improved stability and grip in fast corners and lane changes
- Sporty feel while remaining suitable for daily road use
- Quality Eibach components for consistent performance
Important: For 2WD Audi A3 8V models with 55 mm front damper diameter only. Wheel spacers may be needed with some original wheels, and some extra OEM parts may be required for correct installation.
Technical Information
| Make | Model | Variant | Model Years | Axle Load Front (Max kg) | Axle Load Rear (Max kg) | Lowering Front (mm) | Lowering Rear (mm) |
|---|---|---|---|---|---|---|---|
| AUDI | A3 (8V1, 8VK) | 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.5 TFSI, 1.8 TFSI, 2.0 TFSI, 1.6 TDI, 2.0 TDI | 04.12 – 10.20 | 980 | 975 | 30-60 mm | 30-55 mm |
| AUDI | A3 SPORTBACK (8VA, 8VF) | 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.5 TFSI, 1.8 TFSI, 2.0 TFSI, 1.6 TDI, 2.0 TDI, 30 TFSI, 35 TFSI, 30 TDI | 09.12 – | 980 | 975 | 30-60 mm | 30-55 mm |
| AUDI | A3 LIMOUSINE / SEDAN (8VS, 8VM) | 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.5 TFSI, 1.8 TFSI, 2.0 TFSI, 1.6 TDI, 30 TFSI, 35 TFSI, 30 TDI | 05.13 – | 980 | 975 | 30-60 mm | 30-55 mm |
Manufacturer Notes
- Except vehicles with 4WD.
- Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
- In order to ensure sufficient clearance it may be necessary to use wheel spacers if the car is equipped with original wheel sizes.
- Only for vehicles with front damper diameter of 55 mm
- In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
- If replacement required: You will find the components in the Components Certificate at the point “Amendment of the vehicle documents”. The Components Certificate can be downloaded on: www.eibach.com – click on British flag – Online Catalog / Product & Components Certificate Search (RED BUTTON)
- For vehicles with rear independant suspension.

