NGK DCPR7EA-9 Spark Plug – Stock No. 6651
This NGK spark plug is a reliable upgrade or replacement for many bikes that use a 12 mm, long-reach, projected tip plug. It helps maintain smooth starts, stable idle, and consistent performance. The built-in resistor reduces electrical noise that can affect the ECU and other electronics.
Use our vehicle lookup or check the Vehicle Fitment tab to confirm it suits your engine.
Why it matters
– Clean, reliable ignition for better throttle response and economy.
– Projected tip helps efficient combustion.
– Factory-gapped at 0.9 mm for quick installation, and can be adjusted to the maker’s spec.
| Part number | DCPR7EA-9 |
|---|---|
| NGK stock number | 6651 |
| GTIN | 087295166512 |
| Category | 686 – Spark Plug |
| Thread diameter | 12 mm |
| Thread reach | 19 mm (3/4 in) |
| Hex size | 16 mm (5/8 in) |
| Seat type | Flat seat with gasket |
| Heat range | 7 (NGK scale) |
| Projection | Projected insulator tip |
| Resistor | Yes |
| Resistance | Approx. 5 k? |
| Centre electrode | Copper core, nickel alloy |
| Ground electrode | Standard single |
| Factory gap | 0.9 mm |
| Gap adjustability | Adjust to vehicle manufacturer spec |
| Recommended torque | 15-20 Nm (M12, gasket seat) |
| Tightening angle (new gasket) | 1/2 – 2/3 turn after finger tight |
Compatibility guidance
Commonly used in many modern motorcycles and scooters that specify a 12 mm thread, 19 mm reach, projected, resistor plug. Always confirm with our vehicle lookup or the Vehicle Fitment tab.
The price displayed is for a single plug, please add the desired amount to your basket.


