Legendary Brands. Serious Performance.
Dinan Wheel Spacers Set (5×112) – 66.5mm CB, 2mm Width, Set of 2
£60.88
EARN REWARD POINTS
Purchasing this product will earn you 121 reward points worth £1.21 to redeem on future purchases. You can check your current points here.
Dinan Wheel Spacers Set (5×112) – 66.5mm CB, 2mm Width, Set of 2
Enhance your vehicle’s stance and performance with the Dinan Wheel Spacers Set, designed specifically for vehicles with a 5×112 bolt pattern and a 66.5mm centre bore. These spacers provide a 2mm width adjustment, allowing for improved wheel offset and clearance, particularly beneficial for accommodating larger brake calipers.
Key Features
- Brand: Dinan
- Bolt Pattern: 5×112
- Centre Bore: 66.5mm
- Width: 2mm
- Quantity: Set of 2
Benefits
- Achieve the desired wheel stance and aesthetic.
- Enhance vehicle handling by optimising wheel alignment.
- Increase clearance for brake calipers and other components.
Important Information
- Longer Bolts Required: Ensure to purchase the appropriate length bolts separately. Refer to the “We Suggest” section for recommendations.
- Compatibility: Verify the correct thread size for your specific vehicle application.
Note
Please check local regulations regarding vehicle modifications and emissions compliance.
Installation Notes
Extended length bolts sold separately. Appropriately sized bolts for the selected spacer kit are suggested below. Please ensure to pair the correct thread size bolts for your specific application using the general application guide located on the bottom of the product page.
| Weight | 5 kg |
|---|---|
| Dimensions | 9 × 7 × 5 cm |
| Brand |
D210-2020 Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.