Legendary Brands. Serious Performance.
Dinan Rear Brake Set by Brembo – Black Calipers, Drilled – BMW 3/4-Series (F30/F31/F32/F33/F34/F36) 2012-2020 – 2.0L XDrive & 3.0L Standard Brakes
£5,427.76
EARN REWARD POINTS
Purchasing this product will earn you 10855 reward points worth £108.55 to redeem on future purchases. You can check your current points here.
Installation Instructions
An installation guide is available for this product, download here.
Dinan by Brembo Rear Brake Set – 2012-2020 BMW 3/4-Series
Enhance your BMW 3/4-Series (F30/F31/F32/F33/F34/F36) with the Dinan by Brembo Rear Brake Set, designed for models from 2012 to 2020 with 2.0L XDrive and 3.0L standard brakes. This high-performance brake set features black calipers and drilled rotors, offering superior stopping power for the discerning driving enthusiast.
Key Features
- Black calipers for a sleek, stealthy appearance
- Drilled rotors for enhanced heat dissipation and performance
- Custom brake pads compatible with BMW brake wear sensors
- Optimised for balanced proportioning and excellent pedal feel
- Reduced noise levels compared to typical big brake kits
Performance and Compatibility
- Extensively tested for street and track use
- Requires aftermarket wheels for adequate brake clearance
- Recommended use with Dinan’s lightweight performance wheels
- Check wheel manufacturer for necessary clearance with Brembo “Gran Turismo” brakes
Important Information
Ensure compliance with local vehicle emissions laws and regulations. Always verify fitment and compatibility with your specific vehicle model and wheel setup.
Installation Notes
For 3.0L RWD & xDrive vehicles with standard brakes (F3x 335i 340i 435i 440i) and for 2.0L xDrive vehicle with standard brakes (F3x 320i 328i 330i 428i 430i).
Must be used in conjunction with Dinan Brembo front brakes. Must modify backing plates.
Before any brake purchase please consult our Brembo Brake Caliper fitment guide & installation instructions to ensure proper fitment on your vehicle. Failure to do so may result in brakes that do not conform to the fitment of your specific wheels.
| Weight | 77 kg |
|---|---|
| Dimensions | 33 × 17 × 11 cm |
| Brand |
D290-0303-BD Confirmed Fitment
Our team haven't provided any fitment data for this product yet, please get in touch or check back later!
Stock at Progressive Parts
Delivery timescales are given as estimates in good faith, but cannot be taken as precise or exact information. We highly advise against booking installation/workshop time or engaging in preparatory work until you've received and inspected the goods.
What do our stock statuses mean?
1+ IN STOCK in green stock is readily available in one of our warehouses for express delivery (at the time of viewing).
LOW STOCK in green means we're running low! 1 or 2 left on the shelf so act fast. Over evenings, weekends and bank holidays this stock can move quickly so please bear this in mind.
0 IN STOCK in blue means our primary warehouse does not have unallocated stock, but our UK partners do. Often these can be shipped quickly and efficiently. You'll be notified via the Track My Order page if further delays are unavoidable.
MADE TO ORDER in blue means we've partnered with a supplier which primarily makes their products to order. It's not on our shelf, but your order goes into production immediately.
0 IN STOCK in orange means everybody we work with is unfortunately out of stock. Stock is not available in the UK. The best course of action is to place an order to create an allocation from the next batch arriving.
OUT OF STOCK in red. This product is unavailable to order, for whatever reason we're unable to obtain stock or there is an issue with supply/lead times.
We're tuners too!
Our staff are car enthusiasts, we understand the need for speed... This includes getting your orders out the door as quickly and securely as possible!
In some instances, extended lead times are unavoidable. This is as labour-intensive and frustrating for us as it is for you, please know we are doing our best to facilitate your modification goals. Abuse of our staff or systems will not be tolerated.
Thank you, Team PP
In the words of the Vehicle Standards Agency (VCA), type approval provides "confirmation that production and samples of a design will meet specified performance standards".
For emissions components this encompasses noise, emissions and balanced back pressure, which have a strong influence on maintaining engine performance (power), and fuel efficiency. Type approval ensures that an aftermarket component will reach, or exceed the performance standard of the corresponding OE part.
Type-approval then, is a certain guarantee that an end user will receive a product of OE equivalent performance attributes.
Products on the Progressive Parts website that meet this approval will be clearly marked or labelled EC or ECE approved.