Powerflex Rear Shock Top Mount Bracket and Bush 10mm (Pair) Road Series – PFR5-5630-10
Manufacturer of automotive polyurethane components, Powerflex’s PFR5-5630-10 kit is a high-performance Rear Shock Top Mount Bracket and Bush 10mm. Suits cars with a standard and aftermarket rear shock absorber with a 10mm pin. Will not fit E36 and E46 Cabriolet models Suspension Brand Rear Shock Absorber Shaft Diameter Original BMW 10mm AST 10mm Bilstein HD, Sport, PSS Coilovers 10mm FK Coilovers 10mm H&R Coilovers 10mm JRZ RS 12mm Koni Sport 10mm KW V1, 2, 3 10mm ST Coilovers 10mm Tein Coilovers 12mm The above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
Powerflex Series: Road
Bush Size: 10mm
Pack Size: 2 (2 required per vehicle)
OEM Part Number Reference: 33521092362 / 33526779670 /
EAN: 5055680000000
Suspension Brand_x000D_ |
Rear Shock Absorber Shaft Diameter_x000D_ |
Original BMW_x000D_ |
10mm_x000D_ |
AST_x000D_ |
10mm_x000D_ |
Bilstein HD, Sport, PSS Coilovers_x000D_ |
10mm_x000D_ |
FK Coilovers_x000D_ |
10mm_x000D_ |
H&R Coilovers_x000D_ |
10mm_x000D_ |
JRZ RS_x000D_ |
12mm_x000D_ |
Koni Sport_x000D_ |
10mm_x000D_ |
KW V1, 2, 3_x000D_ |
10mm_x000D_ |
ST Coilovers_x000D_ |
10mm_x000D_ |
Tein Coilovers_x000D_ |
12mm_x000D_ |
_x000D_
The above list is meant as a guide only. If your shock absorber brand is not listed, measuring the OD of the shaft will determine whether PFR5-5630-10 or PFR5-5630-12 should be fitted._x000D_
DIAGRAM FITTING POSITION
30
REQUIRED
PER vehicle
2
Pack
QUANTITY
2
POLYURETHANE SPECIALISTS
UK AUTHORISED DEALER
SUSPENSION PERFORMANCE
A wealth of experience derived from years working within race environments.
POLYURETHANE SPECIALISTS
Lightweight and strong, the cornerstone for all materials used in our performance parts.
LIFETIME WARRANTY
On the entire range of Powerflex products, confidence in quality.
Why Polyurethane Bushes?
Suspension bushes are some of the most highly stressed components fitted to a motor car. They undergo enormous strains and in the most arduous of conditions with no maintenance or lubrication.Â
The material they are manufactured from is a rubber compound containing natural products that deteriorate with age. It becomes softer and more pliable, resisting the forces placed on it less and less. Therefore allowing more and more movement of suspension components and offering less and less control over the suspension geometry.
This in turn causes accelerated tyre wear, braking instability, and poor handling. This is the single biggest reason you can instantly tell the difference driving a three-year-old car compared to a showroom new one. However, even new cars will benefit from POWERFLEX bushes because of the superior design they offer much more effective control of the suspension components to a much greater extent than normal rubber items.
With the technological advances in this material, it has been possible to overcome the common problem associated with harder bushes which is increased noise. By correctly engineering the polyurethane compound, bushes can be made 25-30% stiffer than new rubber items but with exactly the same noise absorbing properties.Â
POWERFLEX for improved performance.   //   POWERFLEX for increased safety.   //   POWERFLEX for prolonged tyre life.
Powerflex Lifetime Warranty
Powerflex is proud to offer a Lifetime Warranty on the entire range of products we manufacture.
We have taken this decision because of the confidence that we have in both our products and also in the way that we have handled any warranty issues in the past.
We have never had a time period based warranty policy because we have always treated issues that customers have had as an opportunity to learn.
Where a problem has occurred due to incorrect fitting, we have always asked ourselves if the reason for the error was due to poor fitting instructions.
When we have had a part failure we have tried to understand if the part was being used outside of its design parameters, perhaps on a race car running slick tyres. In cases like this, should we be offering a specific motorsport compound?
Like all manufacturing, we have had the occasional material quality issue and in these cases, we have always replaced parts without question.
So now we have decided to formalise our open and honest policy and boast about it!
We will replace any Powerflex product that any customer in the world is unhappy with for any reason.
The only conditions that we attach to this Warranty are:
- By purchasing and using Powerflex products, you are agreeing to the terms of our Lifetime Warranty as set out below.
- This Warranty applies to the original purchaser only. Proof of purchase may be required
- That in the event of an issue you contact us directly at sales@powerflex.co.uk and give as much information as possible to enable us to help you. This will involve giving us details of the installation and any changes made to the car, photos of failed parts, and the installation.
- Warranty is restricted to the replacement of the supplied goods, but no consequential loss (e.g. carriage charges, garage labour costs, vehicle recovery, car hire, loss of earnings, etc.) from any resulting problems. In the event of failure, we may require the old, failed parts returned to us for inspection after sending replacements.
- Any parts used for track/motorsport/competition purposes or part numbers ending ‘BLK’ are excluded from our Lifetime Warranty.
What we ask in return is that anyone wanting replacement parts contacts us directly and sends us as much information as possible which will help us determine the reason for a problem.
