Maxton Design Rear Valance Ford Focus MK2 ST (Preface)
The Maxton Design Rear Valance is designed specifically for the Ford Focus mk2 ST preface version from 2004 to 2007. It is a complete set that includes the rear valance.
Fitting the rear valance is simple. It has 3 long threaded bolts that need to be positioned and lined up against the rear bumper. Once you mark where the bolts make contact with the bumper, you will need to drill holes for each marked point. After that, you can slide the threaded bolts into the holes and use 5mm nuts and washers to mount the diffuser. For a more secure fit, we recommend using 3M tape or glue on the left and right corners.
Please note that the diffuser is designed for a standard exhaust system with twin 3” tailpipes. If you decide to install it with higher dimension pipes, make sure they do not collide with the diffuser and are not too close. The high temperature of the tailpipe can cause deformation or melting of the item. Any custom modifications should be properly checked before fitting.
The Maxton Design Rear Valance is made of ABS plastic, a material specifically created for use in the automotive industry. ABS is commonly used in the production of factory bumpers and other car body parts. ABS products are known for their increased strength and flexibility.
This product has been TUV MATERIALGUTACHTEN certified, ensuring its quality and material.
Kit includes:
- Rear Valance
Choosing the right Maxton kit for you!
It is important for customers to check the specification of their own vehicle against the product description, and if their vehicle has an existing sports trim level, body kit or factory enhancement that may cause it to look different from other similar models. For example: Volkswagen R-Line, BMW M-Power/M-Pack, Audi S-Line, Ford ST-Line, Merc AMG-Line, Seat FR. These kits will not fit models that don't meet these specifications.
Returning a Maxton Product
Purchased the incorrect kit for your vehicle? Or not sure you like the surface finish when it arrives? No problem!
Maxton Design products are eligible for return if the product has not been fitted, drilled, modified or damaged in any other way and still has the protective factory film intact. Unfortunately, there are no exceptions. Please see our Terms & Conditions for more information.
Installation & Fitting
Instructions & Guides
Maxton Design provide either an online reference (below) or printed instructions with their products, we can't stress enough how important it is to follow these guidelines. Not only does this create a safe, aesthetically well fitted product, but it increases the longevity and lifespan of the kit.
Neither Progressive Parts nor Maxton Design will be unable to provide and support or warranty for products fitted incorrectly. For example, front splitters require the front bumper to be removed, without doing so the bolts will be incorrectly positioned and may not be able to cope with the down-force exerted on it. Straying from the guidelines in this manner must be done so at the owners risk.
Fibreglass & "Non-Prepped" Products
By adding these products to your basket you are agreeing to the below statement.
All Maxton Design Fibreglass products including certain bumpers, spoilers, spoiler extensions and skirts will require “prep” before installing.
These are not a simple 'ready to fit' modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require filling, sanding and repairing (defined "prep") prior to paint being applied, which can be undertaken by any reputable body shop at minimal cost.
Return requests based on not anticipating the definition above are not accepted, please be aware you have agreed to this statement and the definition of “prep” work required prior to purchasing.
Product images shown for sale often indicate a finished product, the colour shown on the vehicle is for illustration purposes.
Fitting Manuals
Please note, Maxton Design products are only available for UK shipping.
Including Northern Ireland, Scottish Highlands and Channel Isles. Delivery fees apply.